Comprehensive Tile Care and Maintenance Guide

Name: Zennar - Plinthe en Mosaique
Brand: mymoroccantile
SKU: 7458584100915
Price: 123.0 MAD
Availability: InStock

My Moroccan Tile - Preserving Centuries of
Craftsmanship

Introduction

Your authentic
Moroccan tiles represent centuries-old craftsmanship from artisans in Fez,
Morocco. Unlike mass-produced tiles, each piece is handcrafted with slight
variations that make it unique. This guide will help you preserve your
investment and maintain the beauty of your tiles for generations.

Moroccan Zellige Tile Care

Understanding Zellige

Zellige tiles are handcrafted using
traditional methods, resulting in variations in thickness, glaze density, and
porosity. This authenticity requires specific care protocols to maintain their
beauty.

Initial Sealing (Critical First Step)

Timing: Seal
zellige tiles 24-48 hours after grout has fully cured.

Product: Use a
penetrating sealer specifically designed for natural stone and porous tiles
(not a topical sealer).

Application:

·
Apply two coats, allowing 4-6 hours between
coats

·
Wipe excess sealer from surface immediately

·
Allow 24 hours to cure before use

Resealing Schedule:

·
High-traffic areas: Every 1-2 years

·
Low-traffic areas: Every 3-4 years

Daily and Weekly Cleaning

Daily: Sweep or vacuum
with a soft brush attachment to remove grit and debris that can scratch the
glaze.

Weekly: Damp mop with
warm water only, or water with a pH-neutral cleaner (pH 7). Always dry the
surface with a soft cloth after wet cleaning to prevent water spots.

What to AVOID

·
Acidic cleaners: Vinegar, lemon juice, or
any cleaner with citric acid will etch the glaze

·
Alkaline cleaners: Bleach, ammonia, or
harsh degreasers can discolor the glaze

·
Abrasive tools: Steel wool, scouring
pads, or abrasive powders will scratch the surface

·
Steam cleaners: Excessive heat can cause
glaze crazing (fine cracks)

Stain Treatment for Zellige

Oil-based stains (cooking
oil, grease): Apply a poultice made from baking soda and water, let sit for
24 hours, then rinse.

Organic stains (coffee,
wine): Apply hydrogen peroxide (3%) for 10-15 minutes, then rinse
thoroughly.

Hard water deposits:
Mix equal parts water and pH-neutral cleaner, apply with soft cloth.

Terracotta Tile Maintenance

Understanding Terracotta

Your terracotta collection (Terra
Floors, Talia, Bijmat, Octa, Star & Cross, and Hexa) represents unglazed
clay tiles. These are more porous than zellige and require intensive initial
treatment and ongoing maintenance.

Pre-Installation Treatment (For
Contractors/Installers)

Pre-sealing:
Apply a penetrating sealer to all terracotta tiles BEFORE grouting to prevent
grout from permanently staining unsealed terracotta.

Curing time:
Allow 48 hours for sealer to cure before grouting.

Post-Installation Sealing Protocol

After installation and
grout curing (7-10 days):

1.
Deep clean: Remove all grout haze and
construction debris with pH-neutral cleaner

2.
First seal coat: Apply penetrating
sealer, allow to absorb (15-20 minutes)

3.
Second coat: Apply within 1 hour of first
coat

4.
Third coat: Apply 24 hours after second
coat

5.
Optional finish coat: For high-traffic
areas, apply a topical sealer for added protection

Routine Terracotta Maintenance

·
Daily: Sweep or vacuum to remove abrasive
dirt

·
Weekly: Damp mop with pH-neutral cleaner
diluted in warm water

·
Monthly: Apply a maintenance coat of
sealer in high-traffic areas

·
Annually: Strip and reseal entire floor

Understanding Terracotta Patina

Terracotta develops a
patina over time—this is normal and desirable in authentic handcrafted tiles:

·
Color deepening: Terracotta naturally
darkens with age and use

·
Wear patterns: High-traffic areas will
show more patina, adding character

·
Uneven aging: Different tiles may age at
different rates due to clay variation

For clients who prefer a
more uniform appearance, more frequent resealing (every 6 months) can slow
patina development.

Terracotta Stain Removal

Fresh spills: Blot
immediately (never wipe, which spreads the stain).

Oil stains: Poultice with
diatomaceous earth or talcum powder for 24-48 hours.

Deep stains: May require
professional restoration or spot re-sealing after treatment.

Hand-Painted Tile Preservation

Understanding Hand-Painted Surfaces

Hand-painted tiles
feature artisan-applied designs that require gentle care to preserve the
painted surface.

Cleaning Hand-Painted Tiles

·
Frequency: Clean only when visibly dirty
(over-cleaning causes unnecessary wear)

·
Method: Soft microfiber cloth dampened
with warm water

·
Pressure: Light touch only—never scrub
painted surfaces

·
Drying: Immediate drying with a separate
clean cloth

Decorative vs. Functional
Applications

Decorative
applications (wall accents, backsplashes with minimal exposure):

·
Minimal sealing needed

·
Dust with dry microfiber cloth monthly

·
Spot clean as needed

Functional
applications (kitchen backsplashes, bathroom walls):

·
Apply two coats of penetrating sealer

·
Reseal annually

·
Clean weekly with pH-neutral cleaner

Long-Term Protection

·
UV exposure: Hand-painted colors can fade
in direct sunlight; consider window treatments

·
Chemical exposure: Keep harsh cleaners,
perfumes, and aerosols away from painted surfaces

·
Physical protection: Use trivets,
coasters, and cutting boards to prevent direct contact

Mosaic Tile Care

Understanding Mosaic Construction

Custom mosaics have more
grout lines per square foot than standard tiles, making grout maintenance the
primary care concern.

Initial
Grout Sealing

After grout cures (7-10 days):

1.
Clean grout lines thoroughly with pH-neutral
cleaner

2.
Apply grout sealer with small brush or
applicator bottle

3.
Wipe excess sealer from tile surfaces
immediately

4.
Allow 24 hours to cure

5.
Apply second coat

Routine Mosaic Cleaning

·
Daily: Wipe down with damp cloth
(especially in bathrooms and kitchens)

·
Weekly: Clean with pH-neutral cleaner,
paying attention to grout lines

·
Monthly: Inspect grout for discoloration
or deterioration

·
Annually: Reseal grout lines

Grout
Line Maintenance

Discoloration: Usually from
inadequate sealing or using colored cleaning products.

Cracking: Can indicate
substrate movement; address structural issues before regrouting.

Mold/mildew: Indicates
moisture problems; improve ventilation and reseal.

Cleaning Grout Without Damaging
Tiles

·
Use a soft-bristled toothbrush for grout lines

·
Never use grout cleaning products that contain
bleach or acids

·
For stubborn grout stains: paste of baking soda
and water, gentle scrubbing

·
Rinse thoroughly and dry completely

Troubleshooting Common Issues

Efflorescence (White Powdery Residue)

What it is:
Salt deposits that migrate from the tile body or substrate to the surface.

How to address:

1.
Allow tiles to fully dry

2.
Brush off powder with soft brush

3.
Clean with pH-neutral cleaner

4.
If persistent, use an efflorescence remover
designed for natural stone

5.
Ensure proper sealing to prevent recurrence

Grout Haze

Prevention: Pre-seal porous tiles before
grouting.

Removal:

· For
fresh haze (within 24 hours): Damp sponge with frequent rinsing

· For
dried haze: pH-neutral grout haze remover

· For
stubborn haze on terracotta: May require professional restoration

Crazing (Fine Surface Cracks)

Causes: Thermal shock,
substrate movement, or natural aging of handmade tiles.

Is it a problem?
Usually cosmetic only; if cracks are deep or widening, consult installer.

Management: Ensure
proper sealing to prevent moisture infiltration.

Lippage (Uneven Tile Surfaces)

What it is: Slight
height differences between adjacent tiles.

Is it a defect?
No—this is characteristic of handcrafted tiles where thickness varies.

Care consideration:
More careful cleaning needed to avoid catching mop edges on raised tiles.

Color Variation

What to expect:

·
Shade variation between tiles is normal and
desirable

·
Color may deepen or lighten with age

·
Different production batches will have variation

This is not a defect: It's proof of
authentic handcrafted production by artisans in Fez, Morocco.

Quick Reference Chart

Tile
Type

Daily
Care

Weekly
Care

Sealing
Frequency

Zellige

Sweep/vacuum

Damp mop,
pH-neutral cleaner

1-4 years

Terracotta

Sweep/vacuum

Damp mop,
pH-neutral cleaner

6-12 months

Hand-Painted

Dust as
needed

Soft damp
cloth

Annually
(functional areas)

Mosaic

Wipe with
damp cloth

Clean with
pH-neutral cleaner

Grout:
Annually

Professional Support

For
questions about caring for your specific tile installation, or to order
replacement tiles, please contact My Moroccan Tile:

Website:
mymoroccantile.com

International Sites:

France/Belgium: carreauxzellige.com

Morocco: saharadesigns.com

Spain: azulejosmarruecos.com

Follow
us: @mymoroccantile on Instagram, Pinterest, and Twitter

Final Thoughts

Your Moroccan tiles are not just a
surface—they're a piece of living history, handcrafted by skilled artisans
using techniques passed down through generations. With proper care, these tiles
will develop character and beauty that only improves with time, becoming a
treasured feature of your space for decades

Zennar - Plinthe en Mosaique

Zennar - Plinthe en Mosaique

Zellij Field Tiles

Zellij Mosaics

Terracotta Pavers / Shapes

Zennar - Plinthe en Mosaique marocaine

Comprehensive Tile Care and Maintenance Guide

Final Thoughts

Assemblage de mosaïques

Des mosaïques faites juste pour vous

Assemblage sur mesure

Produits récemment consultés